4HU
19’’
The Notch Filter is used when high attenuationis required for narrow spacing between the working and the rejected frequency in the VHF range. Attenuation and Insertion Loss can be adjusted by the rotating loops of the cavity. It is used for frequency spacing of 300 kHz or less. It is installed in a single 4 unit 19” cabinet.
The Notch Filter is used when high attenuationis required for narrow spacing between the working and the rejected frequency in the VHF range. Attenuation and Insertion Loss can be adjusted by the rotating loops of the cavity. It is used for frequency spacing of 300 kHz or less. It is installed in a single 4 unit 19” cabinet.
| Frequency band: | 118 – 144 MHz |
|---|---|
| Impedance: | 50 Ω |
| Max power: | 100W CW |
| Insertion loss: | Adjustable 0.5 ÷ 2.5 dB |
| Connector type: | N Female |
|---|---|
| Dimensions: | 19” rack, 4HU, depth 670 mm |
| Operating Temp.: | -10°C to +55°C |
| Tuning method: | Rotary knob, telescopic movement |
| Notch Filters | Channels | Cabinet 4HU | Frequency Spacing (kHz) | Attenuation dB |
|---|---|---|---|---|
| MCP180-V/2 TI F04VR180M1HSxxxx |
1 | 1 | 100 | ≥ 25 |
| 200 | ≥ 30 | |||
| 300 | ≥ 40 |
MCP180-V/2TI
ISO 9001
Quality Control
Standard
© Copyright Telmec
Soc. Coop a r.l
Via A. Meucci, 8
50012 Grassina
Florence Italy
P.IVA 05012270483
SO 9001 Quality Control Standard
© Copyright Telmec, Soc. Coop a r.l
Via A. Meucci, 8 – 50012 Grassina – Florence Italy
P.IVA 05012270483
